5 Tips for Good Toilet Maintenance

Maintaining Your Toilet

Step 1: Check the inner workings Collapse

Every 6 months , check the inner workings of your toilet to make sure everything is running properly.

  • Remove the tank lid and flush the toilet.
  • Assure that the flapper is fully sealed. It’s connected to the handle of the toilet by a tiny chain.
  • Assure the fill valve is stopped at a suitable water level.
  • Make sure that there is no resistance when you turn the angle stops on and off.

Step 2: Replace the wax ring or rubber ring Collapse

The ring around your toilet should be replaced every four to five years. If the wax ring becomes stale, it can lead to sewer odors. It is also possible for a wax-free ring to come loose, resulting in foul odors. We can help you avoid sewer odors as well as other sewer problems.

Step 3: Check for leaks in tank collapse

If you have food color in your home, you can do to test if there is a leak. Wait up to 30 minutes and place two or three drops of food color in the tank. This indicates a leak in the tank. It can lead to a surge in your water bill. To fix this, call a plumber.

Step 4: Listen for any noises after flushing collapse

Listen for any squealing, humming or buzzing in your pipes. You may hear squealing or humming after flushing. This could indicate that there is high water pressure at home. Water pressure that is too high can damage the toilet and other plumbing fixtures. If your water pressure is not between 55-60 PSI. One simple phone call will fix the water pressure at your home.

Step 5: Consider a water softener collapse

A water softener helps to reduce or remove unwanted calcium, magnesium and other debris. Soft water prevents corroding water pipes and toilet gaskets.

Leave a Reply

Your email address will not be published. Required fields are marked *